增加区域坐标

backend_service/src/prompts/simple_mode_prompt.txt

@@ -21,13 +21,13 @@
     {"name": "fly_to_waypoint", "description": "导航至一个指定坐标点。使用相对坐标系（x,y,z），单位为米。", "params": {"x": "float", "y": "float", "z": "float", "acceptance_radius": "float, 可选，默认2.0"}},
     {"name": "move_direction", "description": "按指定方向直线移动。方向可为绝对方位或相对机体朝向。", "params": {"direction": "string: north|south|east|west|forward|backward|left|right", "distance": "float[1,10000], 可选, 不指定则持续移动"}},
     {"name": "orbit_around_point", "description": "以给定中心点为中心，等速圆周飞行指定圈数。", "params": {"center_x": "float", "center_y": "float", "center_z": "float", "radius": "float[5,1000]", "laps": "int[1,20]", "clockwise": "boolean, 可选, 默认true", "speed_mps": "float[0.5,15], 可选", "gimbal_lock": "boolean, 可选, 默认true"}},
-    {"name": "orbit_around_target", "description": "以目标为中心，等速圆周飞行指定圈数（需已有目标）。", "params": {"target_class": "string, 见复杂模式定义列表", "description": "string, 可选", "radius": "float[5,1000]", "laps": "int[1,20]", "clockwise": "boolean, 可选, 默认true", "speed_mps": "float[0.5,15], 可选", "gimbal_lock": "boolean, 可选, 默认true"}},
+    {"name": "orbit_around_target", "description": "以目标为中心，等速圆周飞行指定圈数（需已有目标）。", "params": {"target_class": "string, 取值同object_detect列表", "description": "string, 可选", "radius": "float[5,1000]", "laps": "int[1,20]", "clockwise": "boolean, 可选, 默认true", "speed_mps": "float[0.5,15], 可选", "gimbal_lock": "boolean, 可选, 默认true"}},
     {"name": "loiter", "description": "在当前位置上空悬停一段时间或直到条件触发。", "params": {"duration": "float, 可选[1,600]", "until_condition": "string, 可选"}},
-    {"name": "object_detect", "description": "识别特定目标对象。", "params": {"target_class": "string, 见复杂模式定义列表", "description": "string, 可选", "count": "int, 可选, 默认1"}},
+    {"name": "object_detect", "description": "识别特定目标对象。一般是用户提到的需要检测的目标；如果用户给出了需要探索的目标的优先级，比如蓝色球危险性大于红色球大于绿色球，需要检测最危险的球，此处应给出检测优先级，描述应当为 '蓝>红>绿'", "params": {"target_class": "string, 要识别的目标类别，必须为以下值之一: balloon,person, bicycle, car, motorcycle, airplane, bus, train, truck, boat, traffic_light, fire_hydrant, stop_sign, parking_meter, bench, bird, cat, dog, horse, sheep, cow, elephant, bear, zebra, giraffe, backpack, umbrella, handbag, tie, suitcase, frisbee, skis, snowboard, sports_ball, kite, baseball_bat, baseball_glove, skateboard, surfboard, tennis_racket, bottle, wine_glass, cup, fork, knife, spoon, bowl, banana, apple, sandwich, orange, broccoli, carrot, hot_dog, pizza, donut, cake, chair, couch, potted_plant, bed, dining_table, toilet, tv, laptop, mouse, remote, keyboard, cell_phone, microwave, oven, toaster, sink, refrigerator, book, clock, vase, scissors, teddy_bear, hair_drier, toothbrush", "description": "string, 可选", "count": "int, 可选, 默认1"}},
     {"name": "strike_target", "description": "对已识别目标进行打击。", "params": {"target_class": "string", "description": "string, 可选", "count": "int, 可选, 默认1"}},
     {"name": "battle_damage_assessment", "description": "战损评估。", "params": {"target_class": "string", "assessment_time": "float[5-60], 默认15.0"}},
     {"name": "search_pattern", "description": "按模式搜索。", "params": {"pattern_type": "string: spiral|grid", "center_x": "float", "center_y": "float", "center_z": "float", "radius": "float[5,1000]", "target_class": "string", "description": "string, 可选", "count": "int, 可选, 默认1"}},
-    {"name": "track_object", "description": "持续跟踪目标。", "params": {"target_class": "string, 见复杂模式定义列表", "description": "string, 可选", "track_time": "float[1,600], 默认30.0", "min_confidence": "float[0.5-1.0], 默认0.7", "safe_distance": "float[2-50], 默认10.0"}},
+    {"name": "track_object", "description": "持续跟踪目标。", "params": {"target_class": "string, 取值同object_detect列表", "description": "string, 可选", "track_time": "float[1,600], 默认30.0", "min_confidence": "float[0.5-1.0], 默认0.7", "safe_distance": "float[2-50], 默认10.0"}},
     {"name": "deliver_payload", "description": "投放物资。", "params": {"payload_type": "string", "release_altitude": "float[2,100], 默认5.0"}},
     {"name": "preflight_checks", "description": "飞行前系统自检。", "params": {"check_level": "string: basic|comprehensive"}},
     {"name": "emergency_return", "description": "执行紧急返航程序。", "params": {"reason": "string"}}
@@ -53,7 +53,6 @@
 - orbit_around_target.radius: [5, 1000]
 - orbit_around_point/target.laps: [1, 20]
 - orbit_around_point/target.speed_mps: [0.5, 15]
-- 电池阈值等同复杂模式（如需涉及）
 - 若参考知识提供坐标，必须使用并裁剪到约束范围内
 
 —— 口令转化规则（环绕类）——

tools/knowledge_base/export_knowledge.ndjson

@@ -1,3 +1,5 @@
 {"text": "在地图上有一个名为 '跷跷板' 的地点或区域，它的leisure是'playground'，其中心位置坐标大约在 (x:15, y:-8.5, z:1.2)。"}
 {"text": "在地图上有一个名为 'A地' 的地点或区域，它的building是'commercial'，其中心位置坐标大约在 (x:10, y:-10, z:2)。"}
 {"text": "在地图上有一个名为 '学生宿舍' 的地点或区域，它的building是'dormitory'，其中心位置坐标大约在 (x:5, y:3, z:2)。"}
+{"text": "在地图上有一个名为 '作业区域' 的地点或区域，它的building是'commercial'，其中心位置坐标大约在 (x:13.0, y:0.0, z:1.5)。"}
+{"text": "在地图上有一个名为 '搜索区' 的地点或区域，它的building是'restaurant'，其中心位置坐标大约在 (x:8.0, y:0.0, z:1.5)。"}

tools/test_api.py

@@ -12,7 +12,7 @@ BASE_URL = "http://127.0.0.1:8000"
 ENDPOINT = "/generate_plan"
 
 # The user prompt we will send for the test
-TEST_PROMPT = "飞到学生宿舍"
+TEST_PROMPT = "起飞"
 
 def test_generate_plan():
     """