针对场景4进行修改

backend_service/src/prompts/simple_mode_prompt.txt

@@ -9,37 +9,38 @@
 示例：
 - “起飞到10米” → {"root":{"type":"action","name":"takeoff","params":{"altitude":10.0}}}
 - “移动到(120,80,20)” → {"root":{"type":"action","name":"fly_to_waypoint","params":{"x":120.0,"y":80.0,"z":20.0,"acceptance_radius":2.0}}}
-- “飞机自检” → {"root":{"type":"action","name":"preflight_checks","params":{"check_level":"comprehensive"}}}
+- “飞机自检” → {"root":{"type":"action","name":"system_checks","params":{"check_level":"comprehensive"}}}
 
 —— 可用节点定义——
 ```json
 {
   "actions": [
-    {"name": "takeoff", "description": "无人机从当前位置垂直起飞到指定的海拔高度。", "params": {"altitude": "float, 目标海拔高度(米)，范围[1, 100]，默认为2"}},
-    {"name": "land", "description": "降落无人机。可选择当前位置或返航点降落。", "params": {"mode": "string, 可选值: 'current'（当前位置）, 'home'（返航点）"}},
-    {"name": "fly_to_waypoint", "description": "导航至一个指定坐标点。使用相对坐标系（x,y,z），单位为米。", "params": {"x": "float", "y": "float", "z": "float", "acceptance_radius": "float, 可选，默认2.0"}},
-    {"name": "move_direction", "description": "按指定方向直线移动。方向可为绝对方位或相对机体朝向。", "params": {"direction": "string: north|south|east|west|forward|backward|left|right", "distance": "float[1,10000], 可选, 不指定则持续移动", "speed": "float, 可选"}},
-    {"name": "approach_target", "description": "快速趋近目标至固定距离。", "params": {"target_class": "string, 要趋近的目标类别", "description": "string, 可选", "stop_distance": "float, 期望的最终停止距离", "speed": "float, 可选"}},
-    {"name": "rotate", "description": "旋转固定角度。", "params": {"angle": "float, 旋转角度(正数逆时针, 负数顺时针)", "angular_velocity": "rad/s, 旋转角速度"}},
-    {"name": "rotate_search", "description": "原地旋转搜索目标。", "params": {"target_class": "string, 要搜寻的目标类别", "description": "string, 可选", "step_angle": "float, 可选, 每一步旋转的角度", "total_rotation": "float, 可选, 总共旋转搜索的角度"}},
-    {"name": "manual_confirmation", "description": "前端弹窗是否继续执行后续任务。", "params": {}},
-    {"name": "orbit_around_point", "description": "以给定中心点为中心，等速圆周飞行指定圈数。", "params": {"center_x": "float", "center_y": "float", "center_z": "float", "radius": "float[5,1000]", "laps": "int[1,20]", "clockwise": "boolean, 可选, 默认true", "speed_mps": "float[0.5,15], 可选", "gimbal_lock": "boolean, 可选, 默认true"}},
-    {"name": "orbit_around_target", "description": "以目标为中心，等速圆周飞行指定圈数（需已有目标）。", "params": {"target_class": "string, 取值同object_detect列表", "description": "string, 可选", "radius": "float[5,1000]", "laps": "int[1,20]", "clockwise": "boolean, 可选, 默认true", "speed_mps": "float[0.5,15], 可选", "gimbal_lock": "boolean, 可选, 默认true"}},
-    {"name": "loiter", "description": "在当前位置上空悬停一段时间或直到条件触发。", "params": {"duration": "float, 可选[1,600]", "until_condition": "string, 可选"}},
-    {"name": "object_detect", "description": "识别特定目标对象。一般是用户提到的需要检测的目标；如果用户给出了需要探索的目标的优先级，比如蓝色球危险性大于红色球大于绿色球，需要检测最危险的球，此处应给出检测优先级，描述应当为 '蓝>红>绿'", "params": {"target_class": "string, 要识别的目标类别，必须为以下值之一: balloon,person, bicycle, car, motorcycle, airplane, bus, train, truck, boat, traffic_light, fire_hydrant, stop_sign, parking_meter, bench, bird, cat, dog, horse, sheep, cow, elephant, bear, zebra, giraffe, backpack, umbrella, handbag, tie, suitcase, frisbee, skis, snowboard, sports_ball, kite, baseball_bat, baseball_glove, skateboard, surfboard, tennis_racket, bottle, wine_glass, cup, fork, knife, spoon, bowl, banana, apple, sandwich, orange, broccoli, carrot, hot_dog, pizza, donut, cake, chair, couch, potted_plant, bed, dining_table, toilet, tv, laptop, mouse, remote, keyboard, cell_phone, microwave, oven, toaster, sink, refrigerator, book, clock, vase, scissors, teddy_bear, hair_drier, toothbrush", "description": "string, 可选", "count": "int, 可选, 默认1"}},
-    {"name": "strike_target", "description": "对已识别目标进行打击。", "params": {"target_class": "string", "description": "string, 可选", "count": "int, 可选, 默认1"}},
-    {"name": "battle_damage_assessment", "description": "战损评估。", "params": {"target_class": "string", "assessment_time": "float[5-60], 默认15.0"}},
-    {"name": "search_pattern", "description": "按模式搜索。", "params": {"pattern_type": "string: spiral|grid", "center_x": "float", "center_y": "float", "center_z": "float", "radius": "float[5,1000]", "target_class": "string", "description": "string, 可选", "count": "int, 可选, 默认1"}},
-    {"name": "track_object", "description": "持续跟踪目标。", "params": {"target_class": "string, 取值同object_detect列表", "description": "string, 可选", "track_time": "float[1,600], 默认30.0", "min_confidence": "float[0.5-1.0], 默认0.7", "safe_distance": "float[2-50], 默认10.0"}},
-    {"name": "deliver_payload", "description": "投放物资。", "params": {"payload_type": "string", "release_altitude": "float[2,100], 默认5.0"}},
-    {"name": "preflight_checks", "description": "飞行前系统自检。", "params": {"check_level": "string: basic|comprehensive"}},
-    {"name": "take_picture", "description": "使用机载相机拍摄照片。", "params": {}}
+    {"name":"takeoff","params":{"altitude":"float[1,100]，默认2"}},
+    {"name":"land","params":{"mode":"'current'/'home'"}},
+    {"name":"fly_to_waypoint","params":{"x":"±10000","y":"±10000","z":"[1,5000]","acceptance_radius":"默认2.0"}},
+    {"name":"fly_sequence","params":{"waypoints":"list[dict] (e.g. [{'x':10,'y':20,'z':5}, ...])","coordinate_frame":"'global'/'local_enu'（global:经纬度, local_enu:以起飞点为原点的东北天坐标系）","speed":"float,可选"}},
+    {"name":"move_direction","params":{"direction":"north/south/east/west/forward/backward/left/right","distance":"[1,10000]，缺省持续移动","speed":"float,可选"}},
+    {"name":"approach_target","params":{"target_class":"string,要趋近的目标类别","description":"string,可选,目标属性描述","stop_distance":"float,期望的最终停止距离","speed":"float,可选,期望的逼近速度"}},
+    {"name":"rotate","params":{"angle":"float,无人机自身旋转角度(正数逆时针,负数顺时针)","angular_velocity":"rad/s,旋转角速度"}},
+    {"name":"rotate_search","params":{"target_class":"string,要搜寻的目标类别","description":"string,可选,目标属性描述","step_angle":"float,可选,每一步旋转的角度","total_rotation":"float,可选,总共旋转搜索的角度"}},
+    {"name":"manual_confirmation","params":{}},
+    {"name":"loiter","params":{"duration":"[1,600]秒/until_condition:可选"}},
+    {"name":"object_detect","params":{"target_class":"person,bicycle,car,motorcycle,airplane,bus,train,truck,boat,traffic_light,fire_hydrant,stop_sign,parking_meter,bench,bird,cat,dog,horse,sheep,cow,elephant,bear,zebra,giraffe,backpack,umbrella,handbag,tie,suitcase,frisbee,skis,snowboard,sports_ball,kite,baseball_bat,baseball_glove,skateboard,surfboard,tennis_racket,bottle,wine_glass,cup,fork,knife,spoon,bowl,banana,apple,sandwich,orange,broccoli,carrot,hot_dog,pizza,donut,cake,chair,couch,potted_plant,bed,dining_table,toilet,tv,laptop,mouse,remote,keyboard,cell_phone,microwave,oven,toaster,sink,refrigerator,book,clock,vase,scissors,teddy_bear,hair_drier,toothbrush,garbage","description":"可选，","count":"默认1"}},
+    {"name":"strike_target","params":{"target_class":"同object_detect","description":"可选，目标属性","count":"默认1"}},
+    {"name":"battle_damage_assessment","params":{"target_class":"同object_detect","assessment_time":"[5,60]，默认15"}},
+    {"name":"search_pattern","params":{"pattern_type":"spiral/grid","center_x":"±10000","center_y":"±10000","center_z":"[1,5000]","radius":"[5,1000]","target_class":"同object_detect","description":"可选，目标属性","count":"默认1"}},
+    {"name":"track_object","params":{"target_class":"同object_detect","description":"可选，目标属性","track_time":"[1,600]秒（必传，不可用'duration'）","min_confidence":"[0.5,1.0]默认0.7","safe_distance":"[2,50]默认10"}},
+    {"name":"deliver_payload","params":{"payload_type":"string","release_altitude":"[2,100]默认5"}},
+    {"name":"system_checks","params":{"check_level":"basic/comprehensive"}},
+    {"name":"return","params":{"reason":"string"}},
+    {"name":"take_photos","params":{"target_class":"同object_detect","description":"可选，目标属性","track_time":"[1,600]秒（必传，不可用'duration'）","min_confidence":"[0.5,1.0]默认0.7","safe_distance":"[2,50]默认10"}}
   ],
   "conditions": [
-    {"name": "at_waypoint", "description": "在指定坐标容差范围内。", "params": {"x": "float", "y": "float", "z": "float", "tolerance": "float, 可选, 默认3.0"}},
-    {"name": "object_detected", "description": "检测到特定目标。", "params": {"target_class": "string", "description": "string, 可选", "count": "int, 可选, 默认1"}},
-    {"name": "target_destroyed", "description": "目标已被摧毁。", "params": {"target_class": "string", "description": "string, 可选", "confidence": "float[0.5-1.0], 默认0.8"}},
-    {"name": "time_elapsed", "description": "时间经过。", "params": {"duration": "float[1,2700]"}}
+    {"name":"at_waypoint","params":{"x":"±10000","y":"±10000","z":"[1,5000]","tolerance":"默认3.0"}},
+    {"name":"object_detected","params":{"target_class":"同object_detect（必传）","description":"可选，目标属性","count":"默认1"}},
+    {"name":"target_destroyed","params":{"target_class":"同object_detect","description":"可选，目标属性","confidence":"[0.5,1.0]默认0.8"}},
+    {"name":"time_elapsed","params":{"duration":"[1,2700]秒"}},
+    {"name":"gps_status","params":{"min_satellites":"int[6,15]，必传（如8）"}}
   ]
 }
 ```
@@ -50,14 +51,4 @@
 - fly_to_waypoint.x,y: [-10000, 10000]
 - search_pattern.radius: [5, 1000]
 - move_direction.distance: [1, 10000]
-- orbit_around_point.radius: [5, 1000]
-- orbit_around_target.radius: [5, 1000]
-- orbit_around_point/target.laps: [1, 20]
-- orbit_around_point/target.speed_mps: [0.5, 15]
 - 若参考知识提供坐标，必须使用并裁剪到约束范围内
-
-—— 口令转化规则（环绕类）——
-- “环绕X米Y圈” → 若有目标上下文则使用 `orbit_around_target`，否则根据是否给出中心坐标选择 `orbit_around_point`；`radius=X`，`laps=Y`，默认 `clockwise=true`，`gimbal_lock=true`
-- “顺时针/逆时针” → `clockwise=true/false`
-- “等速” → 若未给速度则 `speed_mps` 采用默认值（例如3.0）；若口令指明速度，裁剪到[0.5,15]
-- “以(x,y,z)为中心”/“当前位置为中心” → 选择 `orbit_around_point` 并填充 `center_x/center_y/center_z`